PCB Order

We will be happy to provide you with a quotation for printed circuit board fabrication. Please fill-out the following form with your specific needs,and we will respond promptly.

Fabrication Specification

1.Order Information
1.1 Part No :
1.2 Overall Board thickness (inch) +/- (measured after plating,soldermask)
1.3 Layer Count: 1.5 Base copper foil outer layer:
1.4 Laminate type: inner layer:
1.6 Board or unit size (inch): X
Panel size(inch): X
V-CUT scoring angle No.of board in array:
Countersinks/counterbores Yes No Minimum Plated through hole copper:
1.7 SolderMask: Color: Finish Type:
1.8 Legend: Color: Carbon ink
1.9 UL logo : UL with logo EVERY CIRCUIT Mark UL on Layer
Date Code Date Format: Mark Date Code on Layer
1.10 Surface Finish: Finish Thickness:
Gold Finger Chamfer: Yes No Chamfer angle:  
1.11 Via holes treatment as original gerber files plugged (filled) soldermask in the via's
1.12 Impedance control Yes No tolerance (OHM) +/-
1.13 Layeup setup: Dielectrics Specified: Yes No Where?
If no , MTL may use any combination to get within final thickness and/or impedance requirement.
May MTL Modify the Lines Widths to meet Impedance Requirements: Yes No
If no, please notify MTL in the first time.
NOTES:
1.14 Electrical Test:
Yes No *** Electrical Test Certification
1.15 Acceptance specification:
Cross-section,solder sample,anf Certificate of Compliance Required
Solder sample required with EVERY shipment.(can be a scrap board)***
1.17 Special Notes:
2.Delivery Information
2.1 Attach with delivery E-test Report Final Inspection Report
Microsection Report Controlled impedance Report
3.Contact Information
3.1 Company:
3.2 Company Add:
3.3 Company Website:
3.2 Contact Name:
3.3 Contact Phone:
3.4 Contact Fax :
3.5 Contact Email:
If you have files to send with this quote,please send your E-mail to us